What Type Of Kontrola Dostępu To Choose?

Control level, the design of the space to be monitored, directional, evacuation in case of emergency, pre-installation or number and model of adequate control equipment. When deciding what type of Kontrola dostępu to choose, we must take into account several factors that will indicate the best solution to your needs.

Level Of Control

An access control aims to limit the percentage of fraud to the maximum. That percentage of fraud is directly related to the requirement of the selected control. Control with sensors and alarms of improper passage, associated cameras and control one to one, will be more demanding than another one in which we only have a reader that realizes a door opening (habitual in access to communities) without any type of vigilance.

Biofinger Rejestracja Czasu Pracy Kontrola dostępu

These Are The Main Factors To Choose Kontrola Dostępu:

One-On-One Step Control: equipment such as turnstiles windlasses or cages allow this type of control. In this way, we reduce the possibility of several steps with a single opening.

Sound Alarms: they will be activated whenever we want to surpass a computer without a correct reading and with permissions.

Manual Or Autonomous: The activation of the step can be done using a manual push button or card control terminal, fingerprint, etc.

Surveillance: You will achieve greater efficiency if access control is monitored, either by a person (reception or security guard) or by video surveillance.

Technology: Among the technologies available there are some safer than others. Nowadays it is relatively easy to clone magnetic stripe or bar code cards, so that proximity or biometrics technologies, whether a finger, vascular or facial, are becoming more common.

It is important to find the balance between control and speed of passage, since the greater control, as a rule, also implies more time per person at each step.

Design Of The Space To Be Controlled

How many open roads are there to access the area to be controlled? It is common to find rooms or rooms with a good access control at the main entrance, but with other access routes, which although secondary, allow the user free access. Another case is that of a poorly efficient main access control because it is not covered in its entirety. It is very important to delimit all the access zones and to have some type each one of them.

Directionality

When we want to perform access control with lathes, we can only control the inputs or also with the outputs. In the first case, we will have the total number of accesses, for example in the case of tickets to pre-stadiums, concerts or sporting events. In the second we will also get the capacity in real time, essential in cases of limited areas such as dance halls, swimming pools or other enclosed spaces where the current regulations limit it.

Evacuation In Case Of Emergency

When you have a room full of people is essential to ensure evacuation in case of emergency. For this purpose, the enclosure must have an evacuation plan approved by police or firefighters, indicating exit routes and emergency doors. In the case where the access control is in one of those ways, it will be mandatory to equip with a system of arm drops and unlocking ports and doors, either connected to the push-button console or directly to alarm. As a general rule, access control equipment is designed to be released in the event of power failure, the most common method for unlocking.

Pre-Installation

It is usually the case in which the works have already been completed, and the necessary cabling for the access control equipment has not been taken into account. Making a small preliminary study of the pre-installation saves time and money, avoiding to break new floors, walls or ceilings to make regales, or what is worse even aesthetically speaking, having to resort to surface piping. Normally the necessary wiring is similar to any modern equipment: 220V power cable, UTP cable for network or cable for RS485 communication, and as many pairs as manual push buttons we need. Additionally, if we are going to control an electronic lock on a door, two wires up to that locks to be able to operate it from the chosen terminal.

Number And Model Of Appropriate Control Equipment

The number and model of equipment or levels of control and safety required may be very different in each situation. As we have discussed before, we must find the balance between control, safety and speed of passage. Analyzing each case is essential so that the investment corresponds adequately with the needs.

Rejestracja czasu pracy

If you are interested in implementing a Access solution of Rejestracja czasu pracy, come to us, and we will be happy to advise you so that your investment can be maximized with the best results.

PTC SECURITY SYSTEMS

ul. Wosia Budzysza 780-612 Gdańsk

Tel. (+4858) 768 59 10

Fax (+4858) 768 59 11

Email: biuro@biofinger.pl

Website: http://Biofinger.pl